Menu
A+ A A-
ALDCBS1X4 four output GPS splitter

1x4 Amplified GPS Splitter

One Input, Four Output Amplified GPS Splitter

Description

Overview

ALDCBS1X4 One Input, Four Output Amplified GPS Splitter

The ALDCBS1X4 GPS Splitter (GNSS Splitter) is a one input, four output amplified splitter based on the Wilkinson splitter design. The frequency response covers the entire L-band (all GNSS Frequencies) with excellent gain flatness. In the standard configuration, (J1) passes DC from the connected GPS device through the splitter to the input (antenna port). The other RF outputs (J2, J3 and J4) are DC blocked and loaded with a 200Ω resistor to simulate the antenna current draw to prevent false antenna alarm faults.

Features

  • Excellent Gain Flatness
    |J1 – J4| < 1.0dB
  • Extremely Flat Group Delay
    Less than 1ns variation
  • Amplifier Gain 18dB typical
  • Passes all GNSS Frequencies (Entire L-band)
  • DC Blocked Outputs Feature 200Ω Loads
    Prevent antenna alarm faults from connected devices
  • Phase Matched Outputs
    Phase (J1 – J4) < 1.0o
  • Special Configurations Available By Request

Downloads

File Type Description
ALDCBS1X4-specsheet-2015.pdf Spec Sheet ALDCBC1X4 GPS Splitter Spec Sheet

Ordering Info

Please refer to page 3 of the datasheet: ALDCBS1X4-specsheet-2015.pdf

By Email

By Phone

Main: 604.814.5069
Fax: 888.831.5149

By Mail

Tri-M Technologies Inc.
208 – 31510 Gill Avenue
Mission, BC, Canada  V4S 0A1

Login or Register