The BAT104-NiMh creates a complete NiMh UPS system by plugging directly into the bottom of the HESC (including the V5SC-SER) Vehicle Power Supplies. The BAT104-NiMh includes seven 2300ma-hr NiMh batteries for a total of 19.3 watt-hours of power. Therefore a BAT104-NiMh can supply backup power for up to sixty minutes to a 19.3 watt load.
The BAT104-NiMh includes Mosfet transistors for preventing deep discharge occurrences during extended power outages. The Mosfet transistors electrically isolate the BAT104-NiMh from the HESC whenever the BE output of the HESC is de-asserted (pulled to 5V).
The BAT104-NiMh has both a thermal fuse and a current fuse for protection against overcharging, and shorts on the battery output.
A digital I2C temperature sensor provides temperature feedback for charge termination, which can be read by the HESC.
|BAT104-NiMh-Spec-Sheet.pdf||Spec Sheet||BAT104-7AA-NiMh Spec Sheet|
|Bat104-NiMh-Manual-17March06.pdf||User Guide||BAT104-NiMh Manual|
|BAT104-NiMh-mtbf.pdf||MTBF||MTBF - BAT104-NiMh|
|BAT104-NIMH-LD||PC/104, NiMh battery pack, 8.4V @ 2700mAh, digital temp sensor|
|BAT104-NIMH-N-LD||PC/104, NiMh battery pack, 8.4V @ 2700mAh, digital temp sensor, No Bus|
|BAT104-NIMH-N-PBF||PC/104, NiMh battery pack, 8.4V @ 2700mAh, digital temp sensor, No Bus|
|BAT104-NIMH-PBF||PC/104, NiMh battery pack, 8.4V @ 2700mAh, digital temp sensor|
|Accessories and Options|
|CH||Humiseal conformal coating and epoxy|
|CS||Silicon conformal coating and epoxy|
|CU||Urethane conformal coating and epoxy|
|NS||Non-Stack Through Bus, modifies N|
Toll Free: 800.665.5600 (North America)
Tri-M Technologies Inc.
208 – 31510 Gill Avenue
Mission, BC, Canada V4S 0A1