Menu
A+ A A-
GLONASS GPS antenna with Low Noise Amplifier

RV-76G

Bulkhead mount GLONASS GPS antenna with Low Noise Amplifier for Mobile Applications

Description

 

Overview

GLONASS GPS antenna with Low Noise Amplifier

RV-76G is the integration of a high performance GPS/GLONASS patch antenna and a state-of-the-art low noise amplifier into a very low-profile, extremely compact and fully waterproof antenna-signal enclosure. When connected to a GPS receiver with +2.5 to 5 VDC antenna power, it provides excellent signal amplification and out band-rejection for that receiver. RV-76G is compatible with almost every GPS/Glonass receiver model on the market and provides an excellent alternative for a vast range of GPS/GLONASS applications including GIS, land survey, fleet management, and vehicle tracking

Advantages

  • Low Noise Figure/ Fully Weatherproof/ Ultra-high Sensitivity
  • Compact Construction/ Excellent Temperature Stability.
  • Specifications

    Physical Condition

    Construction:

    Polycarbonate radome detachable cable/connector for  easy mount, rubber-O-rign between top radome and  screw base for waterproof.

    Dimension:

    60 mm in diameter x 38mm in height.

    Weight:

    125 grams (w/o cable & connector)

    Color

    Standard in ivory with 0.8 inch threaded wing ntu (standard accessory ).

    Mounting:

    Bulkhead mount with 0.8 inch threaded wing nut ( standard accessory)

    Cable & Connector

    RF Cable:

    5 meters RG174/U (standard) cable & length (optional)

    Pulling Strength:

    6 Kg @ 5 sec.

    Connector Available:

    BNC, TNC, GT5, MCX(OSX), SMA, SMB or SMC. Straight or right angle.

    Optional Adapters:

    Universal Connector Adapter (FME to TNC/BNC/SMA/SMB/MCX)

    Antenna Element

    Polarization:

    R.H.C.P. (Right Hand Circular Polarization)

    Gain at Zenith:

    +1.5 dBic typical

     

    Mounted on the 70mm x 70mm square ground plane

    Axial Ratio:

    3 dB max.

     

    Mounted on the 70mm x 70mm square ground plane

    Low Noise Amplifier

    Gain:

    27 dB @ 3V typically

    Band Width:

    43 MHz min. @ ≤-10 dB

    Noise Figure:

    1.5 Typical.

    Supply Voltage:

    2.5~5V DC

    Current Consumption:

    3V DC : 10.6 mA Typical 5.0V DC : 21 mA Typical

    OVERALL PERFORMANCE (Antenna Element, LNA & Cable)

    Center Frequency:

    1575.42 MHz ± 10 MHz & 1602 MHz ± 8 MHz

    Gain:

    At 90° 27 + 3dB (Cable loss) note:1. Mounted on the 70mm x 70mm square ground plane

    VSWR:

    2.0 max.

    Output Impedance:

    50 ohm

    Environmental conditions

    Operating Temperature:

    -40°C~+85°C

    Storage Temperature:

    -40°C~+90°C

    Relative Humidity:

    95% non-condensing

     

    By Email

    By Phone

    Main: 604.814.5069
    Fax: 888.831.5149

    By Mail

    Tri-M Technologies Inc.
    208 – 31510 Gill Avenue
    Mission, BC, Canada  V4S 0A1

    Login or Register