Menu
A+ A A-
MAXBES Rugged 10-port Gigabit Switch

MAXBES

Compact Rugged 10-port Gigabit Switch with 2 SFP+ 10Gbit ports, EN50155/EN55022/EN55024/EN61000/EN60068

Description

Overview

Compact Rugged 10-port Gigabit Switch

The MAXBES comes with 8-ports 1Gbit and 2-ports 10Gbit speed. The eight 1GBit ports are either available as eight RJ45 copper ports or four RJ45 copper ports and four 1GBit SFP. The open frame version also offers lockable headers instead of RJ45. All ports have status LEDs, indicating the activity and speed of each port.

The MAXBES solution is extremely compact and can also be used as open frame solution or in a MIL housing with connectors of your choice. Supply power is 8-36VDC and uses less than 15W. The product can be operated at -20°C to 60°C and optionally even up to +70°C.

For the fiber ports, most Ethernet compatible transceivers (acc. MSA) can be used. It allows the users to select the appropriate transceiver for each link. As managed switch, the product gives access to various switch settings to configure features like: Quality of Service, VLAN, Rapid Spanning Tree, etc.. To adjust these switch settings, MPL provides an easy to use web interface.

MAXBES Highlights

  • Includes two 10Gbit SFP+ ports
  • RJ45 & header versions
  • Wide input 8-36VDC
  • Fully manageable through Web Interface or Telnet
  • Copper or mixed Copper/Fiber versions
  • Fanless operation
  • These features make the MAXBES ideally suited for any rugged or industrial network applications. Due to the low power consumption, robust and flexible design, the products are well suited for any embedded system. It is the perfect fit, whether they are used in a rugged, hot or other harsh environment. The MAXBES makes it easy to set up a challenging network!

    Specifications

    Board Key Data
    Switch lookup Engine High performance lookup engine supports up to16k MAC entries
    IEEE 802.3x flow control, back pressure flow control
    Status LED 2 LEDs for each copper port (Link/Activity and Speed indicators)
    1 LED for each SFP (Link/Activity indicators)
    External Status LED All LED for remote indication are available over lockable header
    Interfaces
    Ports 8x 1Gbit copper, 2x 10Gbit SFP+ / or 4x 1Gbit copper, 4x 1GBit SFP, 2x 10Gbit SFP+
      Copper ports Auto crossover (Auto MDI/MDIX) support., auto polarity correction, auto negotiation
    Support for 802.3az Energy Efficient Ethernet
      1Gbit SFP ports Supports all 1GBit SFP which are MSA compliant and Ethernet compatible
    Support for digital diagnostics monitoring (DDM) and triple speed copper SFP
      10Gbit SFP ports (2x) Supports all 10GBit SFP+ and 1GBit SFP which are MSA compliant and Ethernet compatible
    Support for direct attached cable SFP+
    Management Software
    MPL developed and maintains a management SW with easy to use web interface.
    Management supports: • Accessible via https, Telnet, RS232 • Configuration file support
      • SNMPv1, v2c and v3 support • DHCP Client
      • Switch statistic • Port Based VLAN
      • IEEE 802.1Q VLAN • Quality of Service
      • IEEE 802.1X MAC Address Checking • IEEE 802.1D RSTP support
      • Port monitoring • Firmware Update via HTTP or TFTP
      • IGMPv3 support (planned) • Trunking support (planned)
    Power
    Input voltage 8VDC- 36VDC, Reverse polarity protection
    Power consumption 15W
    Environment
    Storage Temperature -45°C up to +85°C (-49°F to +185°F)
    Operating Temperature -20°C to +60°C (-4°F to +140°F) at full operation
    optionally up to 70°C (158°F)
    Relative Humidity 5% to 95% non condensing
    Standard Compliance
    The MAXBES is designed to meet or even exceed the most common standard Particular references are:
    EMC EN 55022, EN 55024, EN 61000, MIL-STD-461E
    Shock & Vibration EN 60068
    Environmental & Safety EN 50155, MIL-STD-810-F, EN 60601, EN 60950
    Approval List CE, IEC 60945, IACS E10
    The MAXBES has been successfully tested according EN50155, MIL-STD-810-G as well as CE marking

    Packaging

    Chassis version width x depth x height comment
    DIN-Rail/Flange 162 x 120 x 62mm custom color or foil available
    IP67 MIL 280 x 208 x 100mm custom housings and connectors available
    Open Frame 155 x 105 x min 23mm custom cooling plate available

    Ordering Info

    maxbes-versions.gif

    By Email

    By Phone

    Main: 604.814.5069
    Fax: 888.831.5149

    By Mail

    Tri-M Technologies Inc.
    208 – 31510 Gill Avenue
    Mission, BC, Canada  V4S 0A1

    Login or Register