Overview
85W Embedded Isolated Power Supply
Tri-M's TPSi1000-5-12 is a galvanically isolated PC/104-Plus power solution for use in embedded applications requiring isolation. The wide-range input voltages, transient suppression, isolation and pluggable terminal mating plugs make the TPSi1000-5-12 ideal for use in rugged and hostile applications. Designed tough for harsh environments including military standards, shock, vibration and extended temperature.
For applications requiring a clean isolated power, the TPSi1085 is the perfect solution. This high density, small form factor, and unprecedented SWaP (size, weight, and performance) board is the perfect design for military, aerospace, transportation, and industrial applications.
Advantages
- High efficiency
- Extended temperature operation
- Rugged design
- High voltage isolation
2250V input/output isolation
6000W transient suppression
Active input voltage clamping
- Transient supression
- Clean and filtered power for the PC/104 bus
- Power/OS
Specifications
Electrical
- Input Voltage Range +9V to +33V DC
- Transient surge stopper designed to MIL-STD-1275
levels
- +5V @ 17A
- +12V @ 2A
- Maximum Combined Power 85W Total*
- Efficiency Up to 88%*
- Isolation Voltage 2250V Max.
- Transient Supression 6000W Total
- Output Ripple/Noise** Typ 20mV, max 75mV
- Line Regulation** ±0.05% Max.
- Load Regulation** ±0.06% Max.
- Switching Frequency 267kHz (5V), 1.01mHz (3.3V)
- Current Limiting Fuse Onboard 15A (on input source)
- Quiescent current 22mA (LEDs & Outputs Off)
Mechanical
- Dimensions PC/104 compliant, 90mm x 96mm x 15mm (3.55” x 3.775” x 0.6”)
- Weight 110g (3.9oz) no plugs, 117g (4.1oz) with plugs
Environment
- Operating Temperature* -40°C to +85°C (-40°F to 185°F)
- Thermal Protection/Shutdown +120°C (248°F)
Ordering Info
Model: TPSi1000-5-12[-B1][+B2][-CC]-PBF; PC/104 size, 12V main output, 5V power output, smart, isolated
Bus Options
where [-B1] is the optional PC/104 bus configuration
“-B1” is blank, stack through PC/104 bus (ex:TPSi1000-5-12-PBF
“-B1” is “-N”, no PC/104 bus (ex: TPSi1000-5-12-N-PBF)
“-B1” is “NS”, non-stack through PC/104 bus (TPSi1000-5-12-NS-PBF)
where [-B2] is the optional Plus bus configuration
“+B2” is blank, stack through Plus bus (ex:TPSi1000-5-12-PBF)
“+B2” is “+N”, no Plus bus (ex: TPSi1000-5-12[-B1]+N-PBF)
“+B2” is “+NS”, non-stack through Plus bus (ex:TPSi1000-5-12[-B1]+NS-PBF)
Conformal Coat Options
where [-CC] is the conformal coating selection.
“-CS” is silicon conformal coating
“-CU” is urethane conformal coating
“-CH” is Humiseal #1B73 conformal coating