The BAT-SLA series includes the BAT-SLA25 and the BAT-SLA45. The BAT-SLA battery backup units have PC/104 footprint and create a complete UPS system by plugging directly into the bottom of the HESC (including the V5SC-SER) Vehicle Power Supplies. Each BAT104-SLA includes five SLA batteries for a nominal backup voltage of 10 volts. The BAT104-SLA25 utilizes 2.5Ahr batteries for a total of 25 watt-hrs backup and the BAT104-SLA45 utilizes 4.5Ahr batteries for a total of 45 watt-hrs of backup power. Therefore a BAT104-SLA45 can supply backup power for up to sixty minutes for a 45 watt load.
The BAT104-SLA includes Mosfet transistors for preventing deep discharge occurrences during extended power outages. The Mosfet transistors electrically isolate the BAT104-SLA from the HESC whenever the BE output of the HESC is de-asserted (pulled to 5V)
The BAT104-SLA has a current activated fuse for protection against shorts on the battery output.
A digital I2C temperature sensor provides temperature feedback for ambient temperature measurement which can be read by the HESC.
|BAT-SLA25-Spec-Sheet.pdf||Spec Sheet||BAT-SLA25 Spec Sheet|
|BAT-SLA45-Spec-Sheet.pdf||Spec Sheet||BAT-SLA45 Spec Sheet|
|bat104sla_man.pdf||User Guide||BAT104-SLA Manual|
|BAT-SLA25-LD||PC/104 size, Sealed Lead Acid battery pack, 5D x 2.5Ah, 10V @ 2500mAh, digital temp sensor|
|BAT-SLA45-LD||PC/104 size, Sealed Lead Acid battery pack, 5DD x 4.5Ah, 10V @ 4500mAh, digital temp sensor|
|Accessories and Options|
|CH||Humiseal conformal coating and epoxy|
|CS||Silicon conformal coating and epoxy|
|CU||Urethane conformal coating and epoxy|
Toll Free: 800.665.5600 (North America)
Tri-M Technologies Inc.
208 – 31510 Gill Avenue
Mission, BC, Canada V4S 0A1