Menu
A+ A A-

HPSP-XYZ: Triple Programmable Output 240W SFF Power Supply

Outputs: 5VSB, Programmable x 3 (1.2V to 25.5V) outputs, 240W RS232 Serial Port for monitoring & control Dual input

Description

 

Overview

Smart SFF Power Supply With Triple Programmable Outputs & Dual Inputs

The HPSP is the product family name of the power supply platform HPSP-x-y-z. The “x” suffix defines the OUT1 voltage, “y” suffix the OUT2 voltage and “z” the OUT3 voltage. In addition to the three main outputs the HPSP also provides a 5VSBY 1A output.

The HPSP is a high power, high performance DC-to-DC converter that supplies three outputs programmable that are
programmable up to 24V output and supports an ultra wide input range of 6-50V. The HPSP has two power inputs protected
with heavy-duty transient surge stoppers that clamps the input voltage to safe levels. The HPSP is ideal for battery and
unregulated input applications. The HPSP uses a flash based microcontroller to supply advanced power management that
monitors and controls the operation of the HPSP through a RS232 serial port.

The HPSP is a state-of-the-art Mosfet based design that provides outstanding line and load regulation and high efficiency. The
low noise design makes the HPSP ideal for use aboard aircraft or military applications or wherever EMI or RFI must be
minimized.

The HPSP advanced power management functions provide timed on/off control of the HPSP, notification of changes to main
power and secondary power status.

The HPSP is PC/104 footprint in size of 3.55 x 3.775 inches with the same mounting holes pattern. However, the HPSP does
not include the PC/104 bus connectors. All generated voltages are provided to a removable header. A removable plug allows
the HPSP to be easily installed. The RS232 serial port is provided on a 2x5 row pin header.

ATX Compatibility

The HPSP can be configured to be signal compatible to an ATX power supply (The HPSP does not provide -5V, -12V that
standard ATX supplies include but the three outputs can be programmed to provide the standard 3.3V, 5V and 12V).

Advantages

  • DC to DC converter for embedded applications.
  • “Load Dump” transient suppression on both main and secondary power supply inputs.
  • Operates from super wide 6VDC to 50VDC input.
  • PC/104 size and mounting holes.
  • Three main programmable outputs OUT1, OUT2 & OUT3. A 1.5A 5VSB outputs is also provided.
  • Temperature range -40 to 85degC (measured on heat spreader).
  • Complete with built-in digital temperature sensor.
  • RS232 serial port for setup, monitoring and control.
  • Opto-coupled inputs for ignition, and system "shut-down" push-button.
  • Can be configured to be ATX compatible

Specifications

Outputs:

Output Maximum Output Current Minimum Output Voltage Maximum Output Voltage
OUT1 6A 10.85V 25.5V
OUT2 5A 3.25V 5.55V
OUT3 2.5A 1.2V 14.2V
5VSB 1.5A 4.95V 5.15V

Enhanced Protection

The HPSP uses an active surge stopper controller and Mosfet to clamp the input voltage to a safe level. Should the energy of the transient exceed the safe-operation-area (SOA) of the surge stopper mosfet the surge stopper controller protects the HPSP by turning off the surge stopper Mosfet. The HPSP operation returns to normal after the high energy transient has passed and the input voltage returned to normal levels. 

Mechanical shock & vibration

MIL-STD-810 levels

Input Voltage

  • 6 to 50VDC
  • Mechanical/Environmental

  • Size (W x L x H) 3.55” x 3.775” x 0.6”
  • Weight 7.30oz / 206.95g
  • Temperature Range -40 to +85°C
  • Opto-coupled on/off control

    Maintained action (IGN) pushbutton

    Serial interface port

    RS232 buffered

    Digital temperature sensor

    One on board.  Supports seven external I2C temperature sensors

    Bi-color LED status indication

    Power, heartbeat and communications status

    Downloads

    File Type Description
    HPSP-Man-20180820.pdf User Guide HPSP Manual
    HPSP-XYZ-SPEC-20190322.pdf Spec Sheet HPSP-XYZ datasheet

    Profiles & Software

    Smart Charger Utility Software

    Frequently asked questions

    Q. How do I get SCU to run under WIN2K or WINXP?
    A. Windows "NT" based OS require an I/O driver such as Porttalk.

    Q. How do I get SCU to run under Linux?
    A. There are a number of approaches such as executing SCU.exe under the WINE Environment.

    Q. Is there an equivalent GUI for Linux as SCU for Windows?
    A: Tri-M offers a GUI for Linux.

    File Description
    SCU.exe Files and Manual V3.0.15 Microsoft Windows based Smart Charger Utility (SCU.exe) Ver 3.0.15 software allows the User to configure and monitor HESC, V5SC and HPSC products
    Setup-SCU3.3.exe Microsoft Windows based Smart Charger Utility (Setup-SCU3.3.exe) Ver 3.3 software allows the User to configure and monitor HESC, V5SC and HPSC products
    Linux Uploader Linux base Firmware uploaders for HESC-SER and HESC104+

    Ordering Info

    Part Number Description
    HPSP-12-3-5-PBF PC/104 size, In 6-50VDC, Out 12V, 3.3V, 5V, 5VSB RS-232 power management (-40 to +85°C)
    HPSP-24-5-12-PBF PC/104 size, In 6-50VDC, Out 24V, 5V, 12V, 5VSB RS-232 power management (-40 to +85°C)
    HPSP-24-3-12-PBF PC/104 size, In 6-50VDC, Out 24V, 3.3V, 12V, 5VSB RS-232 power management (-40 to +85°C)
    HPSP-24-3-5-PBF PC/104 size, In 6-50VDC, Out 24V, 3.3V, 5V, 5VSB RS-232 power management (-40 to +85°C)
    HPSP-12-5-12-PBF PC/104 size, In 6-50VDC, Out 12V, 5V, 12V, 5VSB RS-232 power management (-40 to +85°C)
    HPSP-12-3-12-PBF PC/104 size, In 6-50VDC, Out 12V, 3.3V, 12V, 5VSB RS-232 power management (-40 to +85°C)
    HPS-X-Y-Z Adjustable outputs

    The HPSP is the product family name of this programmable power supply. Each output can be specified to be factory set to a
    specific voltage when ordered. The part number ordering format for specifying output voltages is: HPSP-x-y-z-PBF where:

    - The “x” suffix defines the OUT1 voltage,
    - the “y” suffix the OUT2 voltage
    - and “z” the OUT3 voltage.
    - The PBF denotes that the parts and assembly process is RoHs compliant. For a load assembled product specify
    “LD” instead of “PBF”.
    - Example: HPSP-24-5-12-PBF. OUT1 = 24V, OUT2 = 5V, OUT3 = 12V. RoHs compliant.

    Other ordering options:

    Conformal coating can be specified as follow: HPSP-x-y-z[-Cq]-PBF where [-Cq] is the optional conformal coating selection.

    - “-CS” for silicone conformal coating.
    - “CU” for urethane conformal coating.
    - “CH” for HumiSeal conformal coating.
    - Example: HPSP-24-5-12-CS-PBF. Silicone conformal coating is applied.

     

    By Email

    By Phone

    Main: 604.814.5069
    Fax: 888.831.5149

    By Mail

    Tri-M Technologies Inc.
    208 – 31510 Gill Avenue
    Mission, BC, Canada  V4S 0A1

    Login or Register