Menu
A+ A A-
ALDCBS1X8 eight output GPS splitter from GPS Networking

1x8 Amplified GPS Splitter

One Input, Eight Output Amplified GPS Splitter

Description

Overview

ALDCBS1X8 One Input, Eight Output Amplified GPS Splitter

The ALDCBS1X8 GPS Amplified Splitter is a one input, eight output device based on the Wilkinson splitter design. The frequency response covers the entire L-band (all GNSS frequencies) with excellent gain flatness. In the standard configuration without external power, Output 1 (J1) passes DC from the connected GPS device through the splitter to the input (antenna port), allowing the GPS receiver to power both an active antenna and the splitter’s internal amplifier. The other RF outputs (J2-J8) are DC blocked and loaded with 200 resistors to simulate the antenna current draw to prevent false antenna alarm faults.

Features

  • Excellent Gain Flatness
    |J1 – J8| < 1.0dB
  • Extremely Flat Group Delay
    Less than 1ns variation
  • Amplifier Gain 14dB typical
  • Passes all GNSS Frequencies (Entire L-band)
  • DC Blocked Outputs Feature 200Ω Loads
    Prevent antenna alarm faults from connected devices
  • Phase Matched Outputs
    Phase (J1 – J8) < 1.0o
  • Special Configurations Available By Request

Downloads

File Type Description
ALDCBS1X8-specsheet-2015.pdf Spec Sheet ALDCBC1X8 GPS Splitter Spec Sheet

Ordering Info

Please refer to page 3 of the datasheet: ALDCBS1X8-specsheet-2015.pdf

By Email

By Phone

Main: 604.814.5069
Fax: 888.831.5149

By Mail

Tri-M Technologies Inc.
208 – 31510 Gill Avenue
Mission, BC, Canada  V4S 0A1

Login or Register