The TX2FX is a Ethernet media converter which translates transmission signals from a twisted-pair 10/100/1000BASE-TX to a 100/1000BASE-X fiber optic cable. It expands network data transmission distances beyond the 100 meter limitation of copper wire, to over 10 kilometers by using single-mode fiber optic cable.
Any standard Small Form-Factor Pluggable (SFP) transceiver module can be used on the fiber optic port. These SFP transceivers modules are available in a variety of transmitter and receiver types, allowing users to select the appropriate module for the required fiber optical interface.
Further the TX2FX provides automatic detection and initializing of the SFP Module (speed and full or half duplex operation) and has easy-to-read diagnostic LEDs for continuous status reports on network speed, traffic, and status of the fiber optic port. The TX2FX allows the use of standard RJ45 UTP/STP and various fiber optic cables.
| Part Number | Description | Status |
| TX2FX-1 |
Ethernet Media Converter, supporting 10/100/1000MBit Copper and 100MBit-FX or 1000MBit-FX SFP Modules. Version with both interfaces on the same PCB side! We recommend to use the new TX2FX-11 version.
The SFP Module is not an integrated part of the convert |
EOL |
| TX2FX-2 |
Ethernet Media Converter, supporting 10/100/1000MBit Copper and 100MBit-FX or 1000MBit-FX SFP Modules. Version with RJ45 and SFP interfaces on opposite PCB side! We recommend to use the new TX2FX-12 version.
The SFP Module is not an integrated part of the |
EOL |
| TX2FX-11 |
Ethernet Media Converter, supporting 10/100/1000MBit Copper and 100MBit-FX or 1000MBit-FX SFP Modules. Version supporting Jumbo Frames and with both interfaces on the same PCB side!
The SFP Module is not an integrated part of the converter and need to be |
S |
| TX2FX-11M |
Ethernet Media Converter, supporting 10/100/1000MBit Copper and 100MBit-FX or 1000MBit-FX SFP Modules. Module built in inside PIP. Version supporting Jumbo Frames and with both interfaces on the same PCB side, RJ45 and SFP port external accessible!
The SF |
S |
| TX2FX-12 |
Ethernet Media Converter, supporting 10/100/1000MBit Copper and 100MBit-FX or 1000MBit-FX SFP Modules. Version supporting Jumbo Frames and with RJ45 and SFP interfaces on opposite PCB sides!
The SFP Module is not an integrated part of the converter and ne |
S |
| Accessories and Options |
| SPIMII-1 |
MII interface connector print (without cable) |
EOL |
| SPIMS4-1 |
10/ 100 Ethernet Switch board with 4 onboard RJ45 connectors (without cable) |
S |
Looking for pricing? Due to fluctuating supplier prices, numerous part variations and quantity discounts we don't post prices on our website. Use our
Quote Request system to request a quote on one or more products. You'll recieve a reply directly from our salespeople with your quote, as well as any other requested information.
