Power and Computing Solutions for Harsh Environments
Long-term available Celeron® M Solution with ECC RAM with 3x Gigabit Ethernet (no Firewire)
PIP9-E
Advantages
- On-board soldered ECC RAM
- Extreme low power consumption
- Fanless operation
- Expansions via PC/104, PC/104-Plus, PCI and PMC
- Long term availability
The PIP9 is a powerful, highly integrated, robust and fanless Packaged Industrial PC based on the Intel Centrino Mobile Technology. It incorporates the low Power embedded Celeron M with 1.0 GHz and 512 KB L2 cache. On-board integrated are numerous features like ECC RAM and Gigabit Ethernet. The PIP9 represents an unique solution for today's demanding industrial needs and reliability. The PIP9 is designed to operate under extreme as well as normal conditions without the need of fans.The specific engineering results in an unique solution which is compact, maintenance free, noiseless, and rugged. The PIP solutions can be assembled according to your needs.
The PIP9 Specialities
Unreached low power consumption and incredible flexibility due to various expansions. The unit comes with a complete set of PC interfaces (Ethernet, USB 2.0, IEEE1394b, Graphics...). It offers industrial features like 8-48 VDC input power, 4 serial ports (RS232/485), PC/104-Plus, PCI and PMC expansion possibilities, CAN, RAID and even UPS functionality are available as internal options.
These features make the PIP9 the ideal solution for any application where a high performance PC with a low power consumption and/or extended temperature next to the reliability is required. Additional you benefit from a high quality, very rugged, small size, and expandable Industrial PC solution. The PIP9 is widely used in vision, medicine, transportation systems, telecom, and in industrial applications.
| File | Description | |
| pip9_spec.pdf | PIP9-E Spec Sheet | |
| pip9_man.pdf | PIP9-E Manual |
| Part Number | Description | Status |
| PIP10-M91E | EN60945 approved PIP with low Power embedded Celeron M 1.0GHz with 512kB L2 Cache, 512MB ECC RAM on-board, functional equivalent to PIP9-1E including galvanic isolation on the input, input range 18-48Vdc. (Housing size and color has to be defined separate | S |
| Accessories and Options | ||
| 2PC/104 -Install | Installation of 2 x PC/104 supplied by cust./distributor, wired to the front of the PIP (2 x 50-pin HDSUB) | S |
| BOLD-1 | Brownout and Load Dump module for all PIP10, PIP20 platform solutions. Detects voltage drop on input and looks for a safe shut down of the PIP. The module is installed on SERIF connector of Serial 4. This solution requires a LiPoly-accumulator! | S |
| CAN-AC2-104i | Softing PC/104 dual CAN module in extended temp, wired to the front of the PIP (2 x DB-9) | S |
| CANopen-1 | Softing CANOpen SW License | R |
| CFFLASH-1000 | 1GB CompactFlash card, -40°C up to +85°C | S |
| CFFLASH-2000 | 2GB CompactFlash, -40°C up to +85°C | S |
| CFFLASH-4000 | 4GB CompactFlash card, -40°C up to +85°C | S |
| CFFLASH-8000 | 8GB CompactFlash card, -40°C up to +85°C | S |
| CFFLASH-16000 | 16GB CompactFlash card, -40°C up to +85°C | R |
| DLD-1 | 2nd. external digital Graphic port on a DVI-I Connector, available for all Celeron M and Pentium M PIP's. Attention: On board DVI connector is Analog & Digital (DVI-I), the expansion DVI connector is a Digital interface only (DVI-D) Caution: no 3D gra | S |
| DOLL-1 | SDVO link to 24-bit LVDS converter with backlight control unit for PIP20 platform | S |
| ECCRAM-512DX | 512MB ECC protected DDR SDRAM Module, -40°C up to +85°C | S |
| ECCRAM-1024DX | 1GB ECC protected DDR SDRAM Module, -40°C up to +85°C | S |
| EXP1-1 | Passive PC/104 expansion card (can be used in combination with PIP83 and PIP120 housings) - in PIP83 one additional PC/104 card can be added. - in PIP120 up to 2 additional PC/104 card can be added. | S |
| FUNI-KIT1 | Allows on all Celeron M and Pentium M PIPs to get one additional USB port to the PIP front. | S |
| Firewire-KIT1 | Allows on all Core Duo solutions to get a 2nd. FireWire port to the PIP front. | S |
| Floppy-3 | External USB Floppy built in separate housing with adapter cable to be used with PIP | R |
| HDD-9EX | 2.5“ Hard disk 100.0 GB capable to withstand -30°C up to +85°C, shock resistant and for 24Hrs/days operation, incl. mounting material, installation and test. | S |
| HDD-9EXS | 2.5“ Hard disk 100.0 GB capable to withstand -30°C up to +85°C, shock resistant and for 24Hrs/days operation. Includes mounting material, installation and test. | S |
| HDD-15S | 2.5“ Hard disk 500.0 GB incl. mounting material, installation and test. (max. environmental temp. 0°C - 50°C). | S |
| IDE FL-8G | IDE-FLASH Disk ( 2.5" ) 8GB size installed and connected to PIP board, -40°C up to 85°C | S |
| IDE FL-16G | IDE-FLASH Disk ( 2.5" ) 16GB size installed and connected to PIP board, -40°C up to 85°C | S |
| IDE FL-32G | IDE-FLASH Disk ( 2.5" ) 32GB size installed and connected to PIP board, -40°C up to 85°C | S |
| IDE2CF-1A44 | CompactFlash slot connection to the IDE port – module in PC/104 form factor with PC/104 connectors. Slot external accessible on PIP side, for memory cards only! | S |
| IDE2CF-1A44i | CompactFlash slot connection to the IDE port – module in PC/104 form factor with PC/104 connectors. Slot lockable and PIP internal – no access from outside! For memory cards only. | S |
| IDE2CF-1N44i | CompactFlash slot connection to the IDE port – module in PC/104 form factor no PC/104 connectors. Slot lockable and PIP internal – no access from outside! For memory cards only. | R |
| IDE2PCC-1A44 | PCMCIA slot connection to the IDE port – module in PC/104 form factor with PC/104 connectors. Slot external accessible on PIP side, for memory cards only! | S |
| MIL75-1 | 75 mm height MIL housing, allowing to install 2x PC/104 in addition to HDD or Flash. IP67 protected all around with configurable connectors according to customer needs – connectors are not included. | R |
| MiniPCI-1 | Passive PC/104-Plus stack-trough extender card to mount a Mini PCI card (such as an IEEE 802.11 WLAN), temperature range -40°C up to +85°C, Mini PCI Type III 124 pin female socket | R |
| OEMCOLOR-xxxx | Customer specific color - additional cost for each CEC (min. order qty 100 pcs split over 12 month) | R |
| OEMFOIL-Cx | Customer specific top foil according customers artwork (CorelDraw file) (min. order qty 100 pcs spit over 12 month) | R |
| OS-Install | Installation of selected Operating System on Flash or HDD. Installation comes with recovery CD. Note: License is not included! | S |
| OS-LDInst | Standard Debian Desktop LINUX with installation CD (English, language can be selected by the customer later) | S |
| OS-LSInst | Standard Debian Server LINUX installation CD (English, language can be selected by the customer later) | S |
| OS-MSDOS | Embedded MS-DOS 6.22 License (English), EOL: 12/2015) | S |
| OS-W2k | Windows 2000 Professional License (Please state language you require!), EOL: 03/2015 | S |
| OS-WEXP | Windows XP Embedded License (Only possible with custom defined master image!) | TBD |
| OS-WNT | Embedded Windows NT Workstation License (only Engl. and Ger.), EOL: 07/2011 | S |
| OS-WXP | OEM Windows XP Professional License (Please state language you require!) | S |
| OSCI-3MIX-1G | PC/104-Plus module with 3 serial lines (RS232/422/485), SW selectable and 1 galvanic isolated RS422/485 serial line (1 x OSCI-KIT1 is required) | R |
| OSCI-3RS2-1G | PC/104-Plus module with 3 fixed RS232 serial lines and 1 galvanic isolated RS422/485 serial line (1 x OSCI-KIT1 is required) | R |
| OSCI-3RS4-1G | PC/104-Plus module with 3 fixed RS422/485 serial lines and 1 galvanic isolated RS422/485 serial line (1 x OSCI-KIT1 is required) | R |
| OSCI-4MIX | PC/104-Plus module with 4 serial lines (RS232/422/485), SW selectable (1 x OSCI-KIT1 is required) | S |
| OSCI-4RS2 | PC/104-Plus module with 4 fixed RS232 serial lines (1 x OSCI-KIT1 is required) | R |
| OSCI-4RS4 | PC/104-Plus module with 4 fixed RS422/485 serial lines (1 x OSCI-KIT1 is required) | R |
| OSCI-6MIX-2G | PC/104-Plus module with 6 serial lines (RS232/422/485), SW selectable and 2 galvanic isolated RS422/485 serial lines (2 x OSCI-KIT1 are required) | S |
| OSCI-6RS2-2G | PC/104-Plus module with 6 fixed RS232 serial lines and 2 galvanic isolated RS422/485 serial lines (2 x OSCI-KIT1 are required) | R |
| OSCI-6RS4-2G | PC/104-Plus module with 6 fixed RS422/485 serial lines and 2 galvanic isolated RS422/485 serial lines (2 x OSCI-KIT1 are required) | R |
| OSCI-8MIX | PC/104-Plus module with 8 serial lines (RS232/422/485), SW selectable (2 x OSCI-KIT1 are required) | S |
| OSCI-8RS2 | PC/104-Plus module with 8 fixed RS232 serial lines (2 x OSCI-KIT1 are required) | R |
| OSCI-8RS4 | PC/104-Plus module with 8 fixed RS422/485 serial lines (2 x OSCI-KIT1 are required) | R |
| OSCI-KIT1 | Cable kit for OSCI board (50-pin 2.54mm connector to 4 x DB-9 connector (10cm cable) Note: OSCI-8x and OSCI-6x requires two kits! | S |
| PATI-1 | PCPC/104-Plus module with 2 x CAN, 8 x 10-bit ADC channels, 32 TPU channels, 2 x RS232, 16Mb SDRAM and 8MB Flash loaded with special Mathworks Firmware. Card installed in PIP and tested, all wired to 2 HD-DSUB. | S |
| PATI-2 | PC/104-Plus module with 2 x CAN, 8 x 10-bit ADC channels, 32 TPU channels, 2 x RS232, 16Mb SDRAM and 8MB Flash loaded with standard MPL Firmware. Card installed in PIP and tested, all wired to 2 HD-DSUB. | S |
| PC/104-1-Install | Installation of PC/104 supplied by customer/distributor, wired to the front of the PIP (1 x 50-pin HDSUB) | S |
| PC/104-2-Install | Installation of PC/104 supplied by customer/distributor, wired to the front of the PIP (2 x50-pin HDSUB) | S |
| PC/104-OEM-Install | Installation of PC/104 card with other connector than the standard 1 x 50-pin HDSUB | R |
| PCCARD-M | 2xPCMCIA slot incl. matching mechanics, installation and test in the PIP. Slots external accessible on PIP front 1 - Hot Plug capable! | N |
| PCI-Install | Installation of PCI card supplied by customer/distributor in the PIP PCI extension Note:Loft-Wiring for PCI card to PIP aluminum plate is not included and needs to be offered separately | S |
| PIP00-C3 | MPL standard cooling plate for PIP10 platform CPU boards (MEM-10157-002). Allowing to install the system into a none MPL housing concept. 6mm thick chromated aluminum plate with a footprint of 280,7 x 170,2mm. Around the PIP board 10 mounting holes are pl | S |
| PIP00-Cx | PIP CPU board mounted on a cooling concept of a customer ready to install in a none MPL housing concept. Solution needs be discussed prior to offer. Costs for Design-In and tests will be charged separate on a time and material basis. | R |
| PIP62-1 | 62mm housing allowing to install 1 PC/104 or PC/104-Plus in addition to HDD or Flash, with DIN rail (Please define the color of your choice) | S |
| PIP62-2 | 62mm housing allowing to install 1 PC/104 or PC/104-Plus in addition to HDD or Flash, flange mountable (Please define the color of your choice) | S |
| PIP83-1 | 82.5mm housing allowing to install up to 2 PC/104 or PC/104-Plus in addition to HDD or Flash, with DIN rail (Please define the color of your choice) Note: with expansion EXP1-1 -> one additional PC/104 card can be added | S |
| PIP83-2 | 82.5mm housing allowing to install up to 2 PC/104 or PC/104-Plus in addition to HDD or Flash, flange mountable (Please define the color of your choice) Note: with expansion EXP1-1 -> one additional PC/104 card can be added | S |
| PIP104PLUS-2 | Active PC/104-Plus extension (PCI to PCI bridge), without additional Power supply, allowing to install: - in PIP6 up to 4 PC/104-Plus and 2 PC/104 cards can be added - in all Celeron M and Pentium M solution (excl. PIPx-2) up to 6 PC/104-Plus can be add | N |
| PIP120-1 | 120mm housing allowing to install up to 4 PC/104 & PC/104-Plus in addition to HDD or Flash, with DIN rail (Please define the color of your choice) Note: In all PIP10 and PIP20 platform solutions (excl. PIP10-2) up to 4 PC/104-Plus With expansion | S |
| PIP120-2 | 120mm housing allowing to install up to 4 PC/104 & PC/104-Plus in addition to HDD or Flash, flange mountable (Please define the color of your choice) Note: In all PIP10 and PIP20 platform solutions (excl. PIP10-2) up to 4 PC/104-Plus with exp | R |
| PIPAD12-1 | Auto calibration 12-bit analog I/O incl. installation, wired to 1x50-pin mini DSUB and tested | R |
| PIPAD32-1 | Auto calibration 32 channel 16 bit A/D +12-bit D/A incl. installation, wired to 2x50-pin mini DSUB and tested | R |
| PIPBATT-4 | LiPoly-Accumulator (11.1V, 1.5Ah) installed inside PIP, matches to BOLD-1. This solution offers about a 15 min autonomy of a PIP10. | S |
| PIPCAN-1 | CAN Module can be added into all PIP10 and PIP20 platform solutions, CAN port externally accessible on Serial 2 DB-9 connector of the PIP; one Module per PIP | S |
| PIPCAN-2 | CAN Module can be added into all PIP10 and PIP20 platform solutions, CAN port externally accessible on additional DB-9 connector at the PIP front; one Module per PIP | S |
| PIPCOAT -1 | Critical components are being bonded with Mereco 1650-60. The selected board then is coated with Humiseal 1A33. Additional we recommend an extended temperature test for coated products. | S |
| PIPDVD-2 | SATA DVD R/W (side accessible, right hand ) only in 83mm housing or above | S |
| PIPGIO48-1 | 48 line high current digital I/O incl. installation, wired to 2x50-pin mini DSUB and tested | R |
| PIPLD-1 | Reverse voltage and load dump protection module for PIPs | S |
| PIPPCI-1 | PCI extension of the 62mm PIP allowing to install 1 half size PCI card, no PC/104 or PC/104-Plus | S |
| PIPPCI-2 | PCI extension of the 82,5mm PIP allowing to install 1 half size PCI card and 1 PC/104 or PC/104-Plus Note: with expansion EXP1-1 one additional PC/104 card can be added | S |
| PIPPCI-3 | PCI extension of the 82,5mm PIP allowing to install 2 half size PCI card and 1 PC/104 or PC/104-Plus including PCI Power supply direct from V-in Note: with expansion EXP1-1 one additional PC/104 card can be added | S |
| PIPPCI-4 | PCI extension of the 120mm PIP allowing to install 4 half size PCI card and 3 PC/104 or PC/104-Plus including PCI Power supply direct from V-in Note: - in PIP10 and PIP20 platform solutions (excl. PIP10-2) three additional PC/104-Plus card wit | S |
| PIPPMC-1 | PMC extension baseboard for the 82.5mm PIP allowing to install 3 PMC modules and one PC/104-Plus card | S |
| PIPPS-3 | Small universal power supply (100-240VAC / 12VDC, 45Watt) with Swiss power cord and mating connector for PIP. | S |
| PIPPS-4 | Small universal power supply (100-240VAC / 24VDC, 60Watt )with Swiss power cord and mating connector for PIP (required for UPS-Systems). | S |
| PIPRIO8-1 | 8 opto inputs, 8 relay outputs incl. installation, wired to 1x50-pin mini DSUB and tested | R |
| PIPRIO20-1 | 20 Relays +20 opto isolated inputs incl. installation, wired and tested | R |
| PIPVIN-4 | Modification of the PIP input voltage range from 8-28VDC to 18-48VDC. Used DC/DC converter with 12V output and max. 50W. DC/DC converter Input and Output Ground are hot-wired and connected to the PIP case. | S |
| PIPVIN-6 | Modification of the PIP input voltage range from 8-28VDC to 9-36VDC. Used DC/DC converter with 12V output and max. 50W. DC/DC converter Input and Output Ground are hot-wired and connected to the PIP case. | S |
| PIPxOS-Install | Installation of one of the above standard Operating System on Flash or HDD. Installation comes with MPL OEM Installation CD. Note: License is not included! | S |
| PMC-DC1 | One ± 12V DC/DC converter equipped on PMC baseboard with ± 250mA for all 3 PMC slots | S |
| PMC-DC3 | Three ± 12V DC/DC converters equipped on PMC baseboard offering ± 250mA for each PMC slot | S |
| SATA-FL-25G-X | 2.5“ SSD, 25GB, MLC, read 270MB/s, write 260MB/s, installed & tested, -40°C up to +85°C, w SATA-KIT | |
| SATA-FL-60G-X | 2.5“ SSD, 60GB, MLC, read 270MB/s, write 260MB/s, installed & tested, -40°C up to +85°C, w SATA-KIT | S |
| SATA-FL-120G-X | 2.5“ SSD, 120GB, MLC, read 270MB/s, write 260MB/s, installed & tested, -40°C up to +85°C, w SATA-KIT | S |
| SATA-FL-240G-X | 2.5“ SSD, 240GB, MLC, read 270MB/s, write 260MB/s, installed & tested, -40°C up to +85°C, w SATA-KIT | S |
| SATA-FL-480G-M | 2.5“ SSD, 480GB, MLC, read 270MB/s, write 260MB/s, installed & tested, -40°C up to +85°C, w SATA-KIT | |
| SATA-Remove1 | HDD and Flash disk assembly kit with removable disk drawer on right case side (over PC/104) , incl. PIP SATA cable. | S |
| SDLD-1 | 2nd. external digital Graphic port on a DVI-I Connector, available for all Core Duo PIP's. Attention: On board DVI connector is Analog & Digital (DVI-I), the expansion DVI connector is a Digital interface only (DVI-D) Caution: no 3D graphics capabiliti | S |
| SDRAM-128 | 128MB SO-DIMM SDRAM Module (144-pin SO-DIMM) | S |
| SDRAM-256DX | 256MB DDR SDRAM Module, -40°C up to +85°C | S |
| SDRAM-512DX | 512MB DDR SDRAM Module, -40°C up to +85°C | S |
| SDRAM-1024DX | 1GB DDR SDRAM Module, -40°C up to +85°C | S |
| SERIF-1 | RS232 Module can be added into all PIP10, PIP20 and Atom platform solutions, externally accessible on DB-9, up to 2 modules per PIP | S |
| SERIF-2 | RS422/ 485 Module can be added into all PIP10, PIP20 and Atom platform solutions, galvanic isolated, externally accessible on DB-9, up to 2 module per PIP | S |
| SFP-1X | 2/1G SFP 850 nm Optical Transceiver, multi mode, up to 500m, with standard LC connector spez. case temperature -40°C to +85°C | S |
| SFP-2X | 1G SFP 1310 nm Optical Transceiver, single mode, up to 10km, with standard LC connector spez. case temperature -40°C to +85°C | S |
| SOUNDPAN-1 | AC97 sound module for all PIP10 and PIP20 platform solutions, mounted and wired to the internal on-board AC97 interface, externally available on the user slot are Line IN, Line OUT, Headphone and MIC on 3.5mm Jack | S |
| SPINAL-1 | SuperCap UPS System built-in 62mm housing Backup time 60W during 15 sec, operational from -30°C up to +65°C On request it can be installed in 440mm PIP 83 housing | |
| SePS-2 | GPS Module mounted on the SERIF socket of the PIP and connected to one of the serial ports of the PIP, 12-channel, -40C to +85C, 2-ports, 1PPS, Differential GPS ready. Supports TSIP, TAIP & NMEA, with backup battery. Comes with a 10cm long cable with bulk | S |
| SePSANT-1 | Miniature Magnetic Mount GPS Antenna, 16.4' (5m) coax with SMA RF connector, environmentally sealed with magnet & 2 mounting screw holes. | R |
| TERM50-1 | 50 screw Terminals with 50-pin Mini DSUB cable incl. Rubber feet and mechanics for stacking | S |
| TRIGET-3M | 3 Gigabit Ethernet controller on PIP build-in PC/104-Plus based module. Ethernet interfaces over RJ45 connectors directly available on the PIP Front. | S |
| TX2FX-11C1 | Ethernet Media Converter, with two RJ45 connectors one 10/100/1000MBit Copper, one 100/1000MBit Copper and one port for 100MBit-FX or 1000MBit-FX SFP Modules. The SFP Module is not an integrated part of the converter and need to be ordered separately. | |
| WLAN-1PCIE | 802.11b/g/n Wireless LAN PCI-Express Mini Card Module mounted inside PIP – for PIP20 platform! | S |
| WLAN-1USB | 802.11b/g/n Wireless LAN USB module mounted inside PIP – for PIP10 platform! | S |
| WLAN-2USB | 802.11b/g/n Wireless LAN USB module mounted inside PIP – for PIP20 platform! | S |
| WLANANT-1 | Antenna assembly for WLAN-1USB with 33cm coaxial cable and vertical rubber antenna (RP-SMA connectors). Caution: The WLAN-1PCIE requires two antennas! | S |
| XTEST-1 | extended temperature test -40° C up to +85°C for the above MPL PC/104-Plus expansions | S |
Looking for pricing? Due to fluctuating supplier prices, numerous part variations and quantity discounts we don't post prices on our website. Use our Quote Request system to request a quote on one or more products. You'll recieve a reply directly from our salespeople with your quote, as well as any other requested information.
