PIP6
Low Power embedded Pentium MMX 266MHz System
- Fanless Operation
- Extreme and extended temperature operation
- Complete shock and vibration options
- Customer specific versions
 |
 |
 |
| PIP6-1 | Low Power embedded Pentium MMX 266MHz with 512kB L2 Cache with on-board CAN, SXGA, 2 x USB1.1, 4 x RS232, 10/100 Ethernet, SCSI-2, PC/104.... (Housing and color has to be defined separately) |
| Accessories and Options | ||
| CAN-AC1-104 | Softing PC/104 CAN module, wired to the front of the PIP (DB-9), CANOpen drivers as option avail. | Caut |
| CAN-AC2-104 | Softing PC/104 dual CAN module, wired to the front of the PIP (2 x DB-9), ext. temp solution avail. | Caut |
| CAN-AC2-104i | Softing PC/104 dual CAN module in extended temp, wired to the front of the PIP (2 x DB-9) | Caut |
| CANopen-1 | Softing CANOpen SW License | Caut |
| EXP1-1 | Passive PC/104 expansion card (can be used in combination with PIP83 and PIP120 housings) - in PIP83 one additional PC/104 card can be added. - in PIP120 up to 2 additional PC/104 card can be added. | |
| EXP2-1 | Allowing to connect external Floppy on additional HD-DSUB connector | |
| FUNIKIT1 | To get a 3rd. USB port on the PIP front on all Celeron M and Pentium M solution | |
| Floppy-1 | Slim line Floppy incl. Mounting kit, cable and installation only for PIP5, PIP6 | |
| Floppy-2 | External Floppy built in separate housing with 1m cable to be used with PIP without adding power | |
| MIL68-1 | 68 mm height MIL housing, allowing to install 1x PC/104 in addition to HDD or Flash. IP67 protected all around with configurable connectors according to customer needs – connectors are not included. | Caut |
| MiniPCI-1 | Passive PC/104-Plus stack-trough extender card to mount a Mini PCI card (such as an IEEE 802.11 WLAN), temperature range -40°C up to +85°C, Mini PCI Type III 124 pin female socket | Caut |
| OS -MSDOS | Embedded MS-DOS 6.22 License (English) | |
| PATI-1 | PC/104-Plus module with 2 x CAN, 8 x 10-bit ADC channels, 32 TPU channels, 2 x RS232, 16Mb SDRAM and 8MB Flash installed in PIP and tested, all wired to 2 HD-DSUB | |
| PIP62-1 | 62mm housing allowing to install 1 PC/104 or FLOPPY-1 in addition to HDD or Flash, with DIN rail (Please define the color of your choice) | |
| PIP62-2 | 62mm housing allowing to install 1 PC/104 or FLOPPY-1 in addition to HDD or Flash, flange mountable (Please define the color of your choice) | |
| PIP83-1 | 82.5mm housing allowing to install up to 2 PC/104 or PC/104-Plus in addition to HDD or Flash, with DIN rail (Please define the color of your choice) Note: with expansion EXP1-1 -> one additional PC/104 card can be added | |
| PIP83-2 | 82.5mm housing allowing to install up to 2 PC/104 or PC/104-Plus in addition to HDD or Flash, flange mountable (Please define the color of your choice) Note: with expansion EXP1-1 -> one additional PC/104 card can be added | |
| PIP104PLUS-1 | Active PC/104-Plus extension (PCI to PCI bridge), including additional Power supply direct from V-in, allowing to install: - in PIP5, PIP6 up to 4 PC/104-Plus and 2 PC/104 cards can be added - in all Celeron M and Pentium M solution (excl. PIP10-2) up to | |
| PIP104PLUS-2 | Active PC/104-Plus extension (PCI to PCI bridge), without additional Power supply, allowing to install: - in PIP5, PIP6 up to 4 PC/104-Plus and 2 PC/104 cards can be added - in all Celeron M and Pentium M solution (excl. PIPx-2) up to 6 PC/104-Plus can | |
| PIP120-1 | 120mm housing allowing to install up to 4 PC/104 & PC/104-Plus in addition to HDD or Flash, with DIN rail (Please define the color of your choice) Note: - in PIP5, PIP6 up to 2 PC/104-Plus with expansion EXP1-1 up to 4 additional PC/104 card | |
| PIPAD12-1 | Auto calibration 12-bit analog I/O incl. installation, wired to 1x50-pin mini DSUB and tested | Caut |
| PIPAD32-1 | Auto calibration 32 channel 16 bit A/D +12-bit D/A incl. installation, wired to 2x50-pin mini DSUB and tested | Caut |
| PIPBATT-2 | Smart battery 2.4Ah, 26Wh, incl. Internal electronics and mounting. This solution offers about a 30 min autonomy of a PIP10 | Caut |
| PIPBATT-3 | Smart battery 4,8Ah, 52Wh, incl. Internal electronics and mounting. This solution offers about a 60 min autonomy of a PIP10 at full load | Caut |
| PIPCAN-1 | CAN Module can be added into all Celeron M and Pentium M solutions, CAN port externally accessible on Serial 2 DB-9 connector of the PIP; one Module per PIP | |
| PIPCAN-2 | CAN Module can be added into all Celeron M and Pentium M solutions, CAN port externally accessible on additional DB-9 connector at the PIP front; one Module per PIP | |
| PIPCD-1 | CDROM R/W and DVD read (front accessible, power connector side) only in 83mm housing or above | |
| PIPCD-2 | CDROM R/W and DVD read (side accessible, right hand ) only in 83mm housing or above | Caut |
| PIPCOM-1 | RS422/485 module installed in PIP (only feasible for PIP5, PIP6) | |
| PIPGIO48-1 | 48 line high current digital I/O incl. installation, wired to 2x50-pin mini DSUB and tested | Caut |
| PIPPCI -L1 | PCI extension of the 120mm PIP allowing to install 1 half size PCI card and 2 PC/104 or PC/104-Plus | |
| PIPPCI -L2 | PCI extension of the 120mm PIP allowing to install 2 half size PCI card (no PC/104 or PC/104-Plus) | |
| PIPPCI-1 | PCI extension of the 62mm PIP allowing to install 1 half size PCI card, no PC/104 or PC/104-Plus | |
| PIPPCI-2 | PCI extension of the 82,5mm PIP allowing to install 1 half size PCI card and 1 PC/104 or PC/104-Plus Note: with expansion EXP1-1 one additional PC/104 card can be added | |
| PIPPCI-3 | PCI extension of the 82,5mm PIP allowing to install 2 half size PCI card and 1 PC/104 or PC/104-Plus including PCI Power supply direct from V-in Note: with expansion EXP1-1 one additional PC/104 card can be added | |
| PIPPCI-4 | PCI extension of the 120mm PIP allowing to install 4 half size PCI card and 3 PC/104 or PC/104-Plus including PCI Power supply direct from V-in Note: - in PIP5, PIP6 only one additional PC/104-Plus card with expansion EXP1-1 two additional PC/ | |
| PIPPMC-1 | PMC extension baseboard for the 82.5mm PIP allowing to install 3 PMC modules and one PC/104-Plus card | |
| PIPPS-2 | Very small universal power supply with power cord for region, 100 -240VAC / 12VDC, 36Watt with mating connector for PIP | |
| PIPRIO8-1 | 8 opto inputs, 8 relay outputs incl. installation, wired to 1x50-pin mini DSUB and tested | Caut |
| PIPRIO20-1 | 20 Relays +20 opto isolated inputs incl. installation, wired and tested | Caut |
| PIPUPS-1 | UPS module for all Celeron M and Pentium M solution, mounted internally of the PIP | |
| PIPUPS-2 | UPS module for all Celeron M and Pentium M solution, mounted internally of the PIP, battery will be mounted externally | |
| PIPVIN-3 | Modification of the PIP input voltage range from 8-28VDC to 18-48VDC, isolated 24V output with 50W (for PIPs with UPS) | |
| PIPVIN-4 | Modification of the PIP input voltage range from 8-28VDC to 18-48VDC, isolated 12V output with 50W (for PIPs without UPS) | |
| PMC -HS1 | Aluminum Heatsink for one PMC module (conductive cooling) installed in PIP | |
| PMC-DC1 | One ± 12V DC/DC converter equipped on PMC baseboard with ± 250mA for all 3 PMC slots | |
| PMC-DC3 | Three ± 12V DC/DC converters equipped on PMC baseboard offering ± 250mA for each PMC slot | |
| SERIF-1 | RS232 Module can be added into all Celeron M and Pentium M solution, externally accessible on DB-9, up to 2 modules per PIP | |
| SERIF-2 | RS422/ 485 Module can be added into all Celeron M and Pentium M solution , galvanic isolated, externally accessible on DB-9, up to 2 module per PIP | |
| SOUNDPAN-1 | AC97 sound module for all Celeron M and Pentium M PIP solutions, mounted and wired to the internal on-board AC97 interface, externally available on the user slot are Line IN, Line OUT, Headphone and MIC on 3.5mm Jack | |
| SePS-1 | GPS Module mounted on the RS485 socket of the PIP and connected to one of the serial ports of the PIP, 12-channel, -40C to +85C, 2-ports, 1PPS, Differential GPS ready. Supports TSIP, TAIP, & NMEA, with backup battery. This solution is only feasible for PI | |
| SePS-2 | GPS Module mounted on the SERIF socket of the PIP and connected to one of the serial ports of the PIP, 12-channel, -40C to +85C, 2-ports, 1PPS, Differential GPS ready. Supports TSIP, TAIP, & NMEA, with backup battery. This solution is feasible for all Cel | |
| TERM50-1 | 50 screw Terminals with 50-pin Mini DSUB cable incl. Rubber feet and mechanics for stacking | |
| WLAN-1USB | 802.11b/g Wireless LAN USB module mounted inside PIP | |
| WLANANT-1 | Antenna assembly for WLAN-1USB with 33cm coaxial cable and vertical rubber antenna | |
