Power and Computing Solutions for Harsh Environments
ATA PC-Card Adapter
IDE2PCC
Advantages
- Bootable storage interfaces
- Master/Slave selection
- Easy to use & inexpensive
- PC/104 form factor
- Up to two PC Card Standard slots dual type I/II or single type III card
- Optional separate power connector
- 44 pin (optional 40 pin) IDE connector
The IDE2PCC is a cost effective and easy to use adapter for connecting PCMCIA PC Cards ATA with true IDE interface (PC Cards) to the standard IDE port of a single board computer (SBC) from MPL or other manufacturers. The IDE2PCC adapter has up to two PC Card Standard slots for type I, II or III cards. Allowing the use of any 5 V PC Card ATA or PCMCIA ATA card.
For mechanical fixing in MPL's PIP family, the IDE2PCC can be connected to the PC/104 slot. The PC Card slot is then available on the right side of the PIP case. For mounting on top of other SBCs, the mounting holes defined in the PC/104 specification are available.
The IDE signals are connected to the IDE2PCC via a standard 40 or 44 pin IDE cable. The power is distributed either with the 44 pin IDE cable or through the PC/104 connector.
With IDE2PCC the storage cards are used like IDE hard disks, they are not hot plug capable in IDE2PCC. If you require hot plugging support, use the PCCARD Module of MPL AG.
| File | Description | |
| ide2pcc_spec.pdf | IDE2PCC Spec Sheet | |
| ide2pcc_man.pdf | IDE2PCC Manual |
| Part Number | Description | Status |
| IDE2PCC-1A44 | PCMCIA slot connection to the IDE port – module in PC/104 form factor with PC/104 connectors. Slot external accessible on PIP side, for memory cards only! | S |
| Accessories and Options | ||
| XTEST-1 | extended temperature test -40° C up to +85°C for the above MPL PC/104-Plus expansions | S |
